Specifications

247
Manual # 016-0159-894 Rev H 01/07
8 - Viper Guidance
Helpful Hint: You can also set the A-B points as you
drive the headlands area of the field.
7. Drive to the end of the first swath path and press Set B. The first
swath path is now set.
All consecutive swath paths are based on the original A-B swath path points.
Viper uses the A-B line for guidance until you clear that line from the screen.
Also, you can have multiple swath lines in a field while using this pattern.
You can clear old lines by pressing anywhere on the screen.
You can also set a second B point if you plan to stop short of the headland
boundary. If you plan to drive outside of the headland boundary, the guid-
ance system advances automatically.
About Enable Snap
The Enable Snap option is available with the Headlands 2 with Contour swath-
ing pattern. Before you can use the guidance system with this pattern for
pass to pass guidance, you must press Enable Snap when you have finished
driving the headlands boundary.