Specifications

246
Viper Installation and Operation Manual 2.08
Headlands 2 with Contour
The Headlands 2 with Contour pattern allows you to set a contoured swath-
ing pattern for a field that has a headlands area around the boundary of the
field. You can set the A-B points either inside the boundary area or inside the
field area.
Setting the Headlands 2 with Contour Pattern
During the job setup, select Headlands 2 with Contour as the swath pat-
tern.
Once the job is started:
1. Drive into the headlands area and press Begin Boundary.
2. Drive the boundary of the field. Viper records the path that you
drive around the boundary.
3. Press End Boundary when you have completed the first boundary
pass.
Helpful Hint: Viper will automatically close the boundary
when the vehicle is within one boom length from the Begin
Boundary set point.
4. Drive the second pass through the boundary. Viper guides the
vehicle based on the first pass through the headland.
5. Press End Pass 2 when you reach the end of the second boundary
pass.
Remember: Viper will automatically close the boundary
when the vehicle is within one boom length from the
beginning of the second boundary pass.
6. Turn into the field and press Set A to start the first swath path.