Specifications

241
Manual # 016-0159-894 Rev H 01/07
8 - Viper Guidance
Headlands 2 Combined
The Headlands 2 Combined pattern allows you to set a straight swathing
pattern for a field that has a double headlands area around the boundary of
the field. This pattern uses the A and B points of the first leg of the head-
lands as the reference swath after two headland passes.
Setting the Headlands 2 Combined Pattern
During the job setup, select Headlands 2 Combined as the swath pattern.
Once the job is started:
1. Enter the headland area and press Set A.
2. Drive to the end of the first swath path and press Set B. The first
swath path is now set.
3. Drive the boundary of the field. Viper records the path that you
drive through the headlands area.
4. Press End Boundary when you reach the end of the first boundary
pass.
Remember: Viper will automatically close the boundary
when the vehicle is within one boom length from the Set A
point.
5. Drive the second pass through the boundary. Viper guides the
vehicle based on the first pass through the headland.
6. Press End Pass 2 when you reach the end of the second boundary
pass..
Remember: Viper will automatically close the boundary
when the vehicle is within one boom length from the
beginning of the second boundary pass.