Specifications

Viper Installation and Operators Manual 2.08
14
Helpfult Hint: See Appendix H for the menu setup of the Invicta
Front Panel Program.
Selecting a Program
1. Press Viper2 on the screen. Viper outlines the name in red.
2. Press OK. Viper starts the selected program.
Screen
Calibration
If the screen does not respond properly to your touch, you might have to re-calibrate the
screen.
To re-calibrate the screen:
1. Press the F1 key on the Viper keypad. A set of crosshairs displays on the screen.
2. Press and hold the center of the crosshairs with your finger. The crosshairs will
move to another section of the screen.
3. Continue to press and hold the crosshairs after each movement of the crosshairs
on the screen.
4. Once the crosshairs stop moving, touch anywhere on the screen to save the
calibration.