Specifications

215
Manual # 016-0159-894 Rev H 01/07
7 - Using AutoBoom
Calibrating
PowerGlide
Plus
Autoboom
1. Select PowerGlide Plus under the Mode area in the upper left
hand corner of the Autoboom Control screen. The following screen
will display.
2. Press the Calibrate button. The Calibrate PowerGlide Plus
screen displays.
3. Press the CAL Boom button. The boom will automatically
calibrate. There will be a ‘Calibrating’ message blinking on
the screen during calibration. Once the calibration has been
completed, the following screen will display.