Specifications

214
Viper Installation and Operation Manual 2.08
Important: The right boom will lift into the air and
then fall. This is part of the calibration process. Use
caution to be sure the area is clear of people or
hardware before starting the process.
7. The CAL Right button will now display STOP CAL and
‘Calibrating’ will flash under the button. This indicates that
the calibration process has begun.
Important: If the boom fails to calibrate, press the
STOP CAL button to stop the calibration and see
your Autoboom manual for more information.
8. Once the right boom is calibrated, the following screen will
display.
9. Press OK to return to the AutoBoom control screen.