Specifications

207
Manual # 016-0159-894 Rev H 01/07
7 - Using AutoBoom
2. In the Mode area in the upper left hand corner of the Autoboom
Control screen, select either UltraGlide or PowerGlide Plus
depending upon the Autoboom system installed on your machine.
Go to the corresponding instructions below to calibrate either and
UltraGlide system or a PowerGlide Plus system.
Calibrating
UltraGlide
Autoboom
1. Select UltraGlide under Mode in the upper left hand corner
of the Autoboom Control screen.
2. Press the Calibrate button. The Calibrate UltraGlide screen
displays.