Specifications

Manual # 016-0159-894 Rev H 01/07
197
6 - Using AccuBoom
Changing Spray/No-Spray Default Colors
A set of default colors is provided for the Spray and No-Spray zones. You can
change the colors that are used to identify spray and no-spray zones.
1. Select Menu.
2. Select Setup, Maps, and Scout Maps.
Helpful Hint: The spray and no-spray labels will be grayed out
and cannot be changed, but the color can be changed by the
operator.
3. Press Color next to the Spray or No-Spray feature name. The Feature
Colors screen displays.
4. Press the color you want to assign to the spray or no-spray zone and press
OK. Viper assigns the color to the zone and returns to the Enter Features
Name and Color screen.
5. Repeat steps 3 and 4 for the other zones.
6. Press OK when you have finished modifying the colors for the spray and
no-spray zones. Viper saves the information and returns you to the Main
Screen.
A set of default colors is provided in Viper. You can change the colors that are used
to identify spray and no-spray zones.
Important: Select colors for the Spray and No-Spray zones
that are different from the coverage map colors, as the coverage
map will be painted over the AccuBoom map when you are in the
AccuBoom tab.