Specifications

Manual # 016-0159-894 Rev H 01/07
191
6 - Using AccuBoom
Zero Rate Shutoff
The Zero Rate Shutoff feature allows you to use AccuBoom to automatically turn
off product control in areas of an Rx map that has zero rate zones. This is particu-
larly useful for spreader applications. By setting the belt valve setting to PWM
Close or Fast Close, AccuBoom will automatically turn off the belt when a zero rate
zone is entered. In addition, for a liquid machine, AccuBoom will automatically shut
off any boom section that has all Rx map products listing a zero rate zone.
Enabling Zero Rate Zone Shut Off
1. Press the Boom Area on the main Viper Screen.
2. From the AccuBoom Control Setup screen, press Next. The second
AccuBoom Control Setup screen appears.
3. Check Enable Zero Rate Shut Off to enable this feature.
AccuBoom Override
The AccuBoom Override feature allows you to momentarily apply product to a
previously covered area while you are in a job. This feature is useful when backing
into a corner during boundary spraying or to spot apply additional product in a previ-
ously applied area.
Enabling AccuBoom Override
1. While in a job, press the Boom Area on the main Viper screen. The
AccuBoom Control Setup screen displays.