Specifications

Viper Installation and Operators Manual 2.08
10
Viper Console Connection
1. Connect one end of the Raven RS-232 cable to the connector labeled “Console”
on the end of the Viper interface cable.
2. Connect the other end to the serial port connector on the back of the Raven SCS
console.
Note: Use only a Raven RS-232 communication cable between the Viper system and the
SCS console. This cable is available as shown below. contact your Raven distributor for
purchasing and information.
Part Part Number
RS-232 cable - 3 ft. 115-0171-040
RS-232 cable - 10 ft. 115-0159-822