Specifications

Manual # 016-0159-894 Rev H 01/07
175
4-Using the Viper System
Creating an Application Report
Helpful Hint: You must be in a job in order to create an
application report.
1. Select Menu, Report. The Customer information screen displays.
2. Using the screen keyboard, enter the customer information in each field on
the screen.
3. Press Next. The Field Information screen displays.
4. Using the screen keyboard, enter the field information in each field on the
screen.
5. Press Next. The Field Conditions screen displays.
6. Using the screen keyboard, enter the field condition information in each field
on the screen.
7. Press Next. The Weather Information screen displays.
8. Using the screen keyboard, enter the weather information in each field on
the screen.
9. Press Next. The Applicator Information screen displays.
10. Using the screen keyboard, enter the applicator information in each field on
the screen.
11. Press Next. The Vehicle Information screen displays.
12. Using the screen keyboard, enter the vehicle tip information in the Tip Size
field on the screen.
13. Press Next. The Product Information screen displays.
14. Using the screen keyboard, enter the product information in each field on
the screen.
15. Select Product Mix if the product is mixed.
16. Press Next. The Ingredient screen displays if you selected Product Mix
on the previous screen. If not, skip to step 19.
17. Using the screen keyboard, enter the ingredient information in each field on
the screen.
18. Press Next. The Report Notes screen displays.
19. Using the screen keyboard, enter any report notes in each field on the
screen.
20. Press OK. Viper saves the information.
Helpful Hint: To see what the above screens look like, please
see the Application Reports section.