Specifications

Viper Installation and Operators Manual 2.08

158

8. AccuBoom provides several methods of operation. Select the desired

option from this screen:



 Standard AccuBoom - This method requires no action or addi-

tional setup by the operator. The operator simply begins to apply

product to the field and the Viper monitors the application and

turns boom sections off if they enter into a previously applied

area.



 Create AccuBoom No-Spray Map - This method allows the

operator to define no-spray zones within the field. This method

is typically used if no previous map has been created and the

operator wants to define the field boundaries and other

boundaries such as waterways, well heads, etc.



 Load AccuBoom No-Spray Map - This method allows the

operator to load a map that has been previously generated. The

operator is given a list of all maps available and allowed to select

the desired map.



 Create Map From Field Boundary - This method allows the

operator to select an existing field boundary and generate a no-

spray boundary map from the field boundary map. The operator

is given a list of all scout files available and allowed to select the

desired map.

See AccuBoom setup in Chapter 6 for details on settup up AccuBoom options.

9. Press Next. The Product Selection screen displays.