Specifications

Manual # 016-0159-894 Rev H 01/07
145
3-Navigating the Viper Interface
Boom Mapping
The boom mapping feature allows you to change the order of the booms and the
display number of the boom. It also allows you to change the boom order from a
logical left-to-right order to a special boom configuration.
Viper allows you to map up to 10 booms using this screen. You can use the ‘Wired
As’ column to change the order of the booms. For example, if you want to change
the order of the booms that you have connected, enter a new ordering scheme in the
‘Wired As’ column.
You can also use the ‘Display Character’ column to change the display number of
the boom. For example, you can change boom 1 to L to signify that boom 1 is the
left-fence row boom. You will then need to change Boom 2 to Boom 1.
Remember: You can only use the characters 0, 1, 2, 3, 4, 5,
6, 7, 8, 9, L, R, and * to label the booms. Use * for skipped booms.