Specifications

Manual # 016-0159-894 Rev H 01/07

1-Getting Started

with the Viper System

Helpful Hint: It is recommended that you use a flashdisk with a minimum

of 128 MB and a maximum of 512 MB for the Viper console. Raven now

offers the SanDisk or SimpleTech industrial grade PCMCIA Compact

Flashcard and PCMCIA Adapter for use with the Viper system. These

flashdisks are industrial grade and have been tested for use with the Viper

system. If you use another type of flashdisk, make sure that it meets the

same recommended requirements as above.

If you need to use more than one flashdisk for your Viper console, copy the Settings and

Streetmaps folders to the new disk. See Chapter 9 - Understanding Flashdisk Files for

more information.

The flashdisk contains specific information for the Viper system to which it is assigned, such

as the following:

 Machine settings

 Rx maps

The flashdisk can also contain other information that is needed to operate the Viper system.

If a flashdisk is not installed or is not installed correctly, the following message displays on

the screen:

Flashdisks Raven Part Number

128 MB Compact Flashdisk with adapter 063-0172-462

256 MB Compact Flashdisk with adapter 063-0172-463