Specifications

Viper Installation and Operators Manual 2.08
136
The Console Comm Port Setup screen displays if Viper is connected to a Raven
Console. This setup is not available when connected to a Raven CAN system.
If you are connected to a Raven CAN system, skip to Auxiliary Comm Port Setup.
Otherwise, follow these directions:
1. Set the following configuration settings:
 Baud = 9600
 Data Bits = 8
 Parity = None
 Stop Bits = 2
2. Press View Data to view the communication strings coming from the
Console connection.
Helpful Hint: If no data appears and you have a blank screen,
press Cancel and re-check your console. Return to step 2 after
ensuring that the Raven Serial Interface console is set up
properly for Viper communication.
Console
Comm Port
Setup
The Auxiliary Comm Port Setup screen displays for you to set up your auxiliary
communication port settings, if necessary.
1. Press OK. Viper saves the comm port information.
Auxiliary
Comm Port
Setup