Specifications

Viper Installation and Operators Manual 2.08
128
Raven GPS Setup
The Raven GPS feature allows you to set up a Raven DGPS receiver by auto-
configuring the receiver.
You can auto-configure the follow Raven DGPS receivers:
 RPR 100S
 RPR 100G
 Invicta 110
 Invicta 115
 Invicta 210
 Invicta 310
Make sure that the Raven receiver is properly connected and powered up before
configuring it with the Viper system.
Auto-Configuring a Raven DGPS Receiver
1. Select Menu, then Setup, and Comm Ports. The GPS Comm Port Setup
screen displays.
2. Select Raven GPS. Viper will automatically configure the port on the
receiver with the following settings:
 Baud = 19200
 Data Bits = 8 bits
 Stop Bit - 1
 Parity = None
3. Press OK when the Viper system is finished configuring the receiver.