Specifications

Manual # 016-0159-894 Rev H 01/07
123
3-Navigating the Viper Interface
Units Configuration
The Units feature allows you to set the unit of measurement used for the Viper
console.
You can set the Viper to display two different units of measurements:
 English: This setting displays units in feet, miles, ounces, etc.
 Metric: This setting displays units in meters, kilometers, liters, etc.
Note: The Viper default setting is English.
Setting the Unit of Measurement
1. Select Menu, then Setup, Local, and Units. The Display Units screen
displays.
2. Select either English or Metric as the display unit of measurement.
3. Press OK. Viper saves the information.