Specifications

Viper Installation and Operators Manual 2.08
108
Coverage
Maps
The Coverage Map allows you to set the acceptable percentages above or below
the target application rate for a field.
You can also change the colors that display on the coverage map that shows if the
application rates were either too high or too low.
Setting the Coverage Map Percentages and Colors
1. Select Menu, then Setup, Maps, and Cov Map. The Coverage Maps
Colors screen displays.
2. Using the screen keyboard, enter the maximum application rate allowed
above the target application rate.
Remember: The default setting is 120%.
3. Using the screen keyboard, enter the minimum application rate allowed
below the target application rate.
Remember: The default setting is 80%.
4. Press Select next to each Rate field to change the coverage color.
5. Press OK when you have finished. Viper saves the coverage
information.