Specifications

Manual # 016-0159-894 Rev H 01/07
107
3-Navigating the Viper Interface
3. Check Switchbox Connected and press the Next button. The Switchbox
Setup screen displays.
4. Press the Down arrow next to the Feature field. A list of features displays.
5. Select the feature that you want to assign to the external switchbox.
6. Press OK. The feature displays in the Features field.
7. Press the Down arrow next to the Shape field. A list of offsets displays.
8. Select the shape that you want to assign to the feature.
9. Press OK. The shape displays in the Shape field.
10. Press the Down arrow next to the Offset field. A list of offsets displays.
11. Select the offset you want to assign to the feature.
12. Press OK. The offset displays in the Offset field.
13. Repeat steps 4 through 12 to assign more features to the switchbox.
14. Press OK when you are done adding features to the switchbox. Viper
saves the information and returns you to the Main screen.
About Offsets
Offsets mark a feature in relationship to the GPS antenna on your vehicle. If you
select ‘No Offset’, Viper marks the feature as in line with the antenna.
If you select ‘Offset to Right’, Viper marks the feature in relationship to the right
end of the boom. If the boom is 90 ft., Viper marks the feature 45 ft. to the right of
the GPS antenna.
If you select ‘Offset to Left’, Viper marks the feature in relationship to the left end
of the boom. If the boom is 90 ft., Viper marks the feature 45 ft. to the left of the
GPS antenna.