Manual

6) Measure the distance for your throw line
The laser line should be 96 " from the face of the dartboard
Soft Tip
Dartboard
Wall
The laser line should be 93 ¹/ " from the face of the dartboard
Steel Tip
Dartboard
Wall
Temporary line
Measure
96" or 93¼"
Measure
96" or 93¼"
Use a common household item,
such as a broom handle or ruler,
to make a temporary line at the
correct distance. Measure from
each side of the dartboard to the
temporary line.
Adjust the angle of the laser head
so that the line appears the correct
distance from the wall
Temporary line
Laser Dart Line
7) Once your laser throw line is set, tighten the 2 screws next to ball to secure the Laser Line in place.
8) WARNING: AVOID DIRECT EYE EXPOSURE
Turn the Laser Dart Line on and position the laser head until it is fl ush with your temporary line.
9) If your surface area is uneven, loosen either the left or right screw and place shims behind the housing of the Laser
Dart Line until the Laser Dart Line is in the correct position.
Muskego, WI 53150
www.gldproducts.com
b y G L D P R O DU C T S
®
WARRANTY: Great Lakes Dart Mfg, Inc. warrants this product to be free of defects in material and workmanship for a
period of 90 days by the original purchaser of the unit. This warranty covers manufacturers defects only, not normal wear
and tear. This warranty does not apply to products damaged through accidents, misuse, or neglect. Your warranty is void
if service is attempted by anyone other than the manufacturer or authorized agent. Great Lakes Dart Mfg., Inc. reserves
the right to make an inspection and determination of all warranty claims. For questions concerning products of Great
Lakes Dart Mfg., Inc., please call our Customer Service Representatives at 1-800-225-7593.
Please call or consult the GLD website, gldproducts.com, to order the 5V 1000ma Positive Outer
Power Adapter, #42-9987.