RE_240-1CA20

Manual VIPA System 200V Chapter 3 Deployment
HB97E - CP - RE_240-1CA20 - Rev. 12/42 3-19
Here you may see if an order has already been started, if an error occurred
or if this order is blocked, e.g. a virtual connection doesn’t exist any longer.
Bit 1: Order running
Set: Per plug-in: when the CP received the order.
Delete: Per plug-in: when an order has been commissioned (e.g.
receipt received).
Analyze: Per handling blocks: A new order is only send, when the
order before is completely commissioned.
Per user: when you want to know, if triggering a new
order is convenient.
Bit 2: Order ready without errors
Set: Per plug-in: when the according order has been
commissioned without errors.
Delete: Per plug-in: when the according order is triggered for a
second time.
Analyze: Per user: to proof that the order has been commissioned
without errors.
Bit 3: Order ready with errors
Set: Per plug-in: when the according order has been
commissioned with errors. The cause of the error may be
found in byte 0 of the indicator word.
Delete: Per plug-in: when the according order is triggered for a
second time.
Analyze: Per user: to proof that the order has been commissioned
with errors. If set, the error code may be found in byte 0 of
the indicator word.
Status management
CPU Byte 1