RE_240-1CA20

Manual VIPA System 200V Chapter 1 Basics and Assembly

HB97E - CP - RE_240-1CA20 - Rev. 12/42 1-17

General data

• Profile rail 35mm

• Peripheral modules with recessed labelling

• Dimensions of the basic enclosure:

1tier width: (HxWxD) in mm: 76x25.4x74 in inches: 3x1x3

2tier width: (HxWxD) in mm: 76x50.8x74 in inches: 3x2x3

• Wiring by means of spring pressure connections (CageClamps) at the

front-facing connector, core cross-section 0.08 ... 2.5mm

or 1.5 mm

(18pole plug)

• Complete isolation of the wiring when modules are exchanged

• Every module is isolated from the backplane bus

• ESD/Burst acc. IEC 61000-4-2 / IEC 61000-4-4 (to level 3)

• Shock resistance acc. IEC 60068-2-6 / IEC 60068-2-27 (1G/12G)

• Class of protection IP20

• Operating temperature: 0 ... +60°C

• Storage temperature: -25 ... +70°C

• Relative humidity: 5 ... 95% without condensation

• Ventilation by means of a fan is not required

Structure/

dimensions

Reliabilit

Environmental

conditions