INTKIT-A1 Analogue 4-Wire Video Intercom Quick Start Guide INT-A1-Q10121
1. Introduction Thank you for purchasing this Intercom System. This install guide covers basic setup and installation for your intercom system. For detailed technical support and software downloads, visit our Help Centre at: help.c5k.info IMPORTANT: • Door Stations are designed to mounted in a sheltered location, not exposed directly to weather.
. Mounting Guide 1. 2. 3. 4. 5. 6. 7. Visit help.c5k.
. Front Panel Indoor Monitor Button Description • Press to hang up the incoming call without answering. • • Press to adjust monitor settings. In set up mode, press to decrease value. • • Press to answer incoming calls. Press again to hang up. In set up mode, press to increase value. • • Press to cycle between video live views of Door Station 1, Door Station 2, Camera 1 and Camera 2. In set up mode, press to skip to next item. • • Press to unlock the door where the door station(VTO) calls.
. Back Panel Name Description PWR 12VDC positive input G 12VDC negative input CAM Analogue camera signal input G Analogue camera signal ground P1, P3 12VDC positive output to door station V1, V3 Video signal A1, A3 Audio signal G Common ground for door stations P2, P4 12VDC positive input to monitors V2, V4 Video signal A2, A4 Audio signal G Common ground for monitors Power Camera Ports Door Station Ports Indoor Monitor Ports Visit help.c5k.
. Wiring Port connection rules • Port A of the indoor monitor can be connected to Port C of another indoor monitor. • Port B of the indoor monitor can be connected to Port D of another indoor monitor. • Port A of the indoor monitor cannot be connected to Port B or D of another indoor monitor. • Port C of the indoor monitor cannot be connected to Port B or D of another indoor monitor. 7.
8. Wiring Example - Three Door Stations and One Indoor Monitor Visit help.c5k.
9.
10. Setup Menu Button Description • Open the menu • • Wake up the monitor Decrease Vol (volume), Bright (brightness), Contrast and BellVol (bell volume), change Bell tone and turn off DND (do not disturb) • Increase Vol (volume), Bright (brightness), Contrast and BellVol (bell volume), change Bell tone and turn off DND (do not disturb) • Select an item to adjust or change • Exit the menu and lock the screen Visit help.c5k.
help.c5k.info For detailed technical support and software downloads, visit our Help Centre at: help.c5k.info All products, designs and software may be subject to change without prior written notice. Information, layout and graphics presented in this guide are the property of their respective owners. See www.c5k.info for more information.
