User Manual
14
4. Push the Rocker button UP to set the GAME TIME.
Auto Select DP HDMI1 HDMI2
GAME TIME
GAME CURSOR
"OK key" touch down
"OK key" touch up
"OK key" touch left
"OK key" touch right
10:00 20:00 30:00 40:00
50:00 60:00 90:00
Section 10: Troubleshooting
The screen is blank
• Press the power button to turn on the monitor.
• Conrm the brightness and contrast settings are set normally.
• Check if the indicator light is ashing. If so, this indicates there is no signal from
your video source.
• If your source is a notebook or laptop, be sure that its settings are in mirror or
extension mode and the device itself is powered on.
The image is out of focus
• Ensure the video cable is inserted properly at both ends.
The screen is flashing
• Try an alternative power source. Insufcient current can be causing this issue.
• Ensure devices such as non-shielded speakers, uorescent lighting, AC
transformers, table fans, etc., are a safe distance away from your screen to avoid
magnetic disturbances.
The color bleeds or visual effects appear unusual.
• If your screen is all red or blue, or any colors disappear, check to see that the
cable is properly inserted. A loose connection can cause a bad signal.
• Try connecting to another video source for comparison.
The screen appears to be scrolling, rolling, or moving unusually.
• Check that your source frequency is within 75Hz.
• Reconnect and ensure your video cable is secure.
The indicator light does not work
• Check that the power is on.
• Check that the power line connected with power.
Cannot plug and play.
• Ensure the monitor is compatible with PC.
• Ensure the graphics card is compatible with the monitor.
• Check that the pins in the interface are not curved.