NFI29CB LED MONITOR USER MANUAL In order to continue serving our customers and providing the best products, our product information including our user manuals may receive updates from time to time. Please check our website for the latest user manuals and product materials.
Table of Contents Section 1: Safety Precautions............................................. 4 Section 2: Box Contents...................................................... 5 Section 3: Product Overview............................................... 6 3.1 – Monitor Buttons........................................................ 6 3.2 – Monitor Ports........................................................... 7 Section 4: Stand Installation...............................................
Section 1: Safety Precautions Read and observe the following warnings and information below. 1. Before cleaning, always unplug your monitor. It is recommended that you use dry cloth or lightly damp cloth to clean your monitor. Dry cloth is, however, the safest. If using damp cloth, wait for your monitor to completely dry before plugging it in again. 2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your monitor. 3. This monitor features ventilation openings on the back of the unit.
Section 2: Box Contents Monitor x 1 Stand Stem x 1 Stand Base x 1 Power Cable x 1 (DC12V 4A) DP Cable x 1 Screws x 2 5 User Manual x 1
Section 3: Product Overview 3.1 – Monitor Buttons Rocker Button Actions Description Rocker Up Gameplus timer shortcut key Rocker Down Gameplus crosshair shortcut key Rocker Left Display mode menu shortcut key Rocker Right Signal source selection menu shortcut key Press Rocker Press and hold for ~6s to turn on or off the monitor. Quick-press to enter the OSD menu.
3.2 – Monitor Ports 1 1 2 3 4 2 3 4 Power Connector: Insert the power cable to supply power to the monitor. HDMI Connectors: Insert one end of the HDMI cable into the computer’s HDMI output and connect the other end to the monitor’s HDMI port. DP Connector: Insert one end of the DP cable into the computer’s DP output and connect the other end to the monitor’s DP port. Audio Output: Insert the audio cable for output of audio signals.
3. Remove the foam covering the back of the monitor. Locate the two top slots of the opening on the back of monitor. Insert the mounting plate into the two top slots. Continue to press in until it clicks into place to make sure the stand is installed in place. 4. Place the monitor on your desktop or table after completing the installation and carefully adjust monitor’s angle and/or orientation as desired. Tilt adjust +5° / -15° 5.
Section 5: Mount Installation 1. Open the package and take out the product with foam still attached. Gently place it on a desktop or table. Remove the extra parts and the foam covering the monitor. If the monitor is already attached to the stand, remove the stand. Button 2. Tighten four screws (not included) onto the mounting holes on back of monitor. 4x Screws (not included) 3. Install the monitor on the wall, mount, or fixture as desired.
Section 6: Basic Operation 1. Insert one end of the DP cable (included) into your PC’s graphics card. An HDMI cable (not included) may also be used. 2. Connect the other end of the cable to the corresponding port on your monitor. HDMI Ports Audio Out DP Port 3. Connect the power cable to your monitor, then connect the other end to your power source. It is recommended that you use a surge protector with adequate voltage if a wall outlet cannot be reached directly. 4.
Section 7: Indicator Light Solid blue light indicates power is on and the monitor is operating normally. Flashing blue light indicates no video source, no horizontal or vertical signal has been detected or voltage is low. Please ensure your computer is on and all video cables are fully inserted and/or connected.
8.1 – OSD Menu Functions Main Menu Sub-Menu Picture Options Description Brightness 0~100 Adjust the overall lightness or darkness of the entire image Contrast 0~100 Adjust the degree of difference between dark and bright areas of the image On Turn on dynamic contrast ratio (DCR) function which automatically adjusts image brightness based on what is being displayed Off Turn off DCR function DCR ECO Color temp.
h up Main Menu Sub-Menu 50:00 Description Display Size Full Screen, Auto, 4:3 Set aspect ratio Low Blue Off, Weak, Strong GAME TIME 10:00 up 50:00 Over Driver Other ch down 60:00 Options 90:00 20:00 Set the30:00 40:00 filter to reduce harmful blue light emitted from the display Turn on/off the function that 60:00GAME 90:00 CURSOR enhances the monitor’s response On, Off time to decrease lag time FreeSync （Adaptive On, Off Sync） GAME CURSOR HDR Off, Auto, On Turn on/off the Adaptive Syn
4. Push the Rocker button UP to set the GAME TIME. GAME TIME ch up 20:00 30:00 50:00 60:00 90:00 40:00 Section 10: Troubleshooting uch uch ch 10:00 The screen is blank GAME CURSOR • Press the power button to turn on the monitor. • Confirm the brightness and contrast settings are set normally. • Check if the indicator light is flashing. If so, this indicates there is no signal from down your video source.
Dim image • Adjust the brightness and contrast ratio. Image jitter/moire pattern • Nearby electric equipment may interfere with the monitor. Light indicator is on or flashing, but there is no image displayed on screen • Check that the monitor power is on. • Check that the graphics card is installed properly. • Check that the signal line connects securely with the monitor. • Check that the pins in the interface are not curved.
Section 12: Specifications Item Model Number Screen Size Display Type Viewing Angle Aspect Ratio Resolution Backlight LED Indicator Typical Brightness Default Color Temp. Color Gamut Contrast Ratio Pixel pitch Response Time Refresh Rate Ports Power Power Consumption OSD Language Detail NFI29CB 29’’ ADS H178° / V178° 21:9 2560 x 1080p E-LED Power on: Blue (solid); Power saving: Blue (flashing) 300 cd/m² (max.) 7500 119%~123% sRGB; 85%~88% NTSC；90%~91% Adobe RGB 1000:1 (Static) 0.2628 × 0.
Section 13: Three-Year Limited Hardware Warranty Your VIOTEK® NFI29CB LED Monitor (“Product”) includes a Three-Year Limited Hardware Warranty (“Warranty”). The Warranty covers product defects in materials and workmanship under normal use. This Warranty is limited to residents of the United States and Canada only and is available only to original purchasers. This Warranty gives you specific legal rights and you may also have other rights which vary from state to state.
DECLARATION OF CONFORMITY This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RELATED INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
COPYRIGHT © 2021 VIOTEK. ALL RIGHTS RESERVED.
