CONTENTS Safety Precautions - Power Supply - Installation - Use and Maintenance - Important Safety Instructions 1 2 3 4-5 User Guidance Information - Accessories - Names of each part - Remote Control 6 6-7 8 Connection - Power connection - Antenna connection - Input connections - Headphone connection 9 9 10 10 Basic Use - Powering the LCD TV - Selecting input source 11 11 Application - Operating the menu - Customizing the PICTURE Settings - Customizing the FUNCTION Settings - Customizing the TUNING
Safety Precautions Power Supply Warnings Do not touch the power plug with wet hands. . Doing so may result in electric shock. Do not bend the power cord excessively or place heavy objects on it. . Doing so may result in fire or electric shock. Do not plug several devices into the same outlet. Do not use a damaged power cord or plug or a loose outlet. . Doing so may result in fire or electric shock. . Doing so may cause the outlet to overheat and start a fire.
Safety Precautions Installation Warnings Do not place the unit where it is exposed to rain, excessive moisture or grease. Do not use or store flamm able or combustible materials near the unit. . Doing so may result in fire electric shock, malfunction, or deformation. . Doing so may result in fire or explosion. Do not place a burning candle, burning anti-mosquito incense, or lighted cigarette on top of the unit. Do not place the unit near any heat source sunch as a fireplace or space heater. .
Safety Precautions Use and Maintenance Warnings Disconnect the power cord from the wall outlet during an electric storm. Do not insert any metal objects, such as a screwdriver, paper clip, or A/V terminals.. . Not doing so may result in fire or electric shock. . Doing so poses a serious risk of fire or electric shock. Never disassemble or modify the unit in any way. Do not attempt to service the unit yourself. . Doing so may result in fire or electric shock.
Safety Precautions Important Safety Instructions Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, the apparatus does not operate normally, or the apparatus has been dropped.
Safety Precautions Important Safety Instructions Servicing is required when the apparatus has been damaged in any way. Your TV could require servicing if any of the following occur: • Supply cord or plug is damaged • Objects have fallen into the apparatus • Apparatus has been exposed to rain or moisture • Apparatus has been dropped • Apparatus does not operate normally Apparatus with Class I construction shall be connected to a Main socket outlet with a protective earthing connection.
User Guidance Information Accessories The following accessories are included in the package STANDBY INPUT TV/AV MUTE DISPLAY LANG AB/EPG CC SUBTITLE EPG -/-- ANGLE ZOOM 10+ EXIT SLEEP VOL- VOL+ TITLE LCD MENU CH+ MENU LCD MENU CH- CH+ FAV TEXT DVD SETUP DVB SUB MENU SLOW ZOOM SLOW STEP SETUP REPEAT GOTO INTRO PROG User’s Guide A-B Remote Control Power adapter TV antenna AV connection cable Headphones Car adapter Names of each part Front view 5 Profile view 4 3 2 7 1
User Guidance Information Names of each part Disassembly of TV Base Wall-Hanging slots Standing the TV with Bracket 7
User Guidance Information Remote Control Function of remote control buttons The remote control uses infra-Red(IR). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle. STANDBY TV/AV MUTE DISPLAY LANG STANDBY : Press to turn the TV on/standby. TV/AV: Press to display the input source menu. MUTE: Press to mute the TV, press again or press VOL+/button to unmute. DISPLAY: Press to display the current program information.
Connection Power connection Power Connecting 1. Connect the small round plug on the power adapter cable to the power input socket at the rear of the set. 2. Connect the power adapter to the main supply. Note: This model has a built-in rechargeable Li-ion battery. You can enjoy watching TV for approximately 2 hours using battery power after a full charge. You can charge the battery by connecting the supplied AC adapter. It will take about 3 hours to charge fully.
Connection Input Connections Composite Cable (Not included) AV OUT External video source such as VCR AV Connection Cable (Included) * Connect the LCD TV’s AV IN/OUT terminal to the output/input terminals with a Composite Cable and an AV Connection Cable(supplied) as the picture shows. Watching Video Signal 1. Connecting the DC power supply, pushing the power switch “OFF/ON” up, and press “STANDBY” button to turn on the LCD TV. 2.
Basic Use Powering the LCD TV To turn on the LCD TV. Connect the DC power supply. Push the switch up, and then press STANDBY on the LCD TV. To turn off the LCD TV. Press the STANDBY button on the LCD TV, and push the switch down. To turn on/off the LCD TV by remote control STANDBY Pressing button. Selecting Input Source * You can select between the TV signal and the input signal of other equipments connected to the TV. * Use this function to switch to the input source you wish to view.
Application Operating the menu 1. Press STANDBY button to turn the LCD TV on. 2. Press LCD-MENU button on the remote control; the on-screen menu will appear on the screen. 3. Use and buttons to select your main menu option. 4. If you do not have a remote, use the following buttons to select an option from the sub-menu: LCD-Menu = menu or exit CH+/- = Scroll up and down Vol. + = Select 1. TV / DTV menu Allows you to make adjustments to your picture settings. (Select TV/DTV source for example) 2.
Application Customizing the PICTURE Settings Press LCD-MENU button on the TV set to display the OSD MENU. The OSD menu includes the following options: Brightness Controls the overall brightness of the picture Contrast Controls the difference between the brightest and darkest regions of the picture. Saturation Controls the saturation of the picture. Sharpness Increase this setting to see crisp edges in the picture; decrease it for soft edges. Hue Controls the hue(only used in NTSC mode).
Application Customizing the FUNCTION Settings Press LCD-MENU button twice on the TV set to display the OSD MENU. The FUNCTION menu includes the following options: Language Select the OSD menu language. Blue Screen Turn on/off the blue screen display when there’s no signal. Wide Screen Control the OSD menu display mode on the screen: 16:9, 4:3. Reset Press button to reset all the set above.
Application Customizing the TUNING Settings Tuning menu in TV mode Tuning menu in DTV mode TIMEZONE SAMOA DAYLIGHT SAVE OFF ANTENNA AIR AUTOSEARCH Press LCD-MENU button thrice on the TV set to display the OSD MENU. The TUNING menu includes the following options: Skip (in TV mode) Skip the channel when you scan the channels with CH+/- button if you turn on the function.
Application EPG menu Press EPG button on the remote control in DTV mode, the screen will display the Guide menu as below. Press EPG button to cancel. Note: The content shown in the picture above is just an example. Closed Caption Press CC button on the remote control in DTV mode, the screen will display the Closed Caption as below. Press CC button to cancel. CC Display Turn on/off the Closed Caption display. CC Type Select the Closed Caption service.
Media Operation Playing media files from the USB and SD card slots - The following files formats are supported by this TV: JPG, MP3, WMA, MP4 (DivX3.11-5.11, Xvid), MPEG1 (DAT, MPG, MPEG), MPEG2 (mpeg, mpg). - File formats including the following are not supported by this TV: BMP, PNG, AAC, DivX 6, DivX HD, Vob, ts. - The following cards are supported by this TV: SD, MMC, Memory Stick (MS). - Only full-size card formats are supported.
Media Operation Playing media files from the USB and SD card slots Ź 8VH ŻŹ WR VHOHFW (3) - Music, (4) - Photo or (5) - Movie 7KH OLVW RI IROGHUV LV GLVSOD\HG in area (1). Ź 6HOHFW DUHD (1) XVLQJ WKH ŻŹ NH\V DQG VHOHFW WKH IROGHU XVLQJ Ÿź 7KH OLVW RI ILOHV LV GLVSOD\HG LQ DUHD (2).
Media Operation System Settings for Media System operation will define the setting of the set; these definitions will be stored until you change them again. General Steps of Setup Menu 1. Press SETUP on the remote control. The main menu will be shown as below. / buttons to select the Icon of the desired section, e.g. “TV System" and press button 2. Press the to open that section. button to open that section. 3. Press / to select the desired feature and again press 4.
Media Operation System Settings for Media 2. LANGUAGE SETUP The language setup options are illustrated below: - OSD LANGUAGE: The OSD will display in the language you choose. 3. AUDIO SETUP -TONE: Use the / button to move the scroll and adjust the tone.
Maintenance and service Trouble shooting - Do not use other functions that are not mentioned in this user’s manual. - In case a problem occurs with your LCD TV, please take the following steps first. - If the problem still occurs, turn the power off and contact your dealer or an authorized service center. Problem Action The screen does not appear. Is the power plug pulled out? Insert the power plug. Press the power button. The screen appears too slowly after the power is turned on.
VIORETM LIMITED WARRANTY Model: PLC10V49 This VIORE brand Product, as supplied and distributed by VIORE and delivered new in the original carton to the original purchaser is warranted by VIORE against manufacturing defects in materials and workmanship for a limited warranty period of one (1) year on parts and labor. However, there will be only a 90 day parts and labor limited warranty for commercial use.
VIORE, Inc.
