User manual

10
You can select the input source by pressing the INPUT button on
the remote control or on the TV set.
Picture menu options
Press the MENU button, and use / button to select the Picture menu as below.
1. Use / button to select what you want to
adjust in the Picture menu.
2. Press OK button, and adjust by / / /
/ OK buttons.
3. When you adjusted to your preference, press
MENU button to exit.
Picture Mode
Select the type of picture which best corresponds to your viewing requirements by selecting picture mode
in Picture menu. You may select the picture mode directly by pressing the PICTURE button on the remote
control, and change picture mode to User then you can adjust.
Brightness
Press / button to select and press OK/ button to enter, then press / button to adjust the
brightness of the picture.
Contrast
Press / button to select and press OK/ button to enter, then press / button to adjust the
contrast of the picture.
Color
Press / button to select and press OK/ button to enter, then press / button to adjust the color
saturation.
Tint
Press / button to select and press OK/ button to enter, then press / button to adjust the tint
of the picture. (In NTSC mode only)
Sharpness
Press / button to select and press OK/ button to enter, then press / button to adjust the
sharpness level of the picture.