2
Contents Caution TV information Remote control Menu operation IPOD operation DVD operation Playing Flash Media Troubleshooting Specification 1 Caution 2 Safety Information 3 Unit and Accessory 3 Product Feature 4 Getting Started-Front View 5 Getting Started-Rear View 6-7 Remote Control Key Functions 8-10 Basic operation 10-11 Picture menu options 11-12 Sound menu options 12-13 Channel menu options 13-15 Settings menu options 16 Settings menu options in VGA/PC 17 Settings
Caution Caution 3124140 This unit complies with FCC directive.
Safety Information 2
Unit and Accessory and Product Feature INPUT 1 2 3 4 5 6 7 8 9 0 -/-- PICTURE SOUND SLEEP DISPLAY NOW PLAYING CH+ VOL+ MUTE CH- VOLEXIT MENU PG UP PG DN OK MENU AUDIO ONLY SETUP CC MTS EPG FAV LANGUAGE ZOOM SUBTITLE SLOW MENU ANGLE TITLE GOTO PROGRAM INTRO SHUFFLE REPEAT REPEAT A-B AAA • 21.
Getting Started Getting Started 8 5 6 7 2 4 1 3 1. LED Power Indicator (Power on/Standby) Indicator on(Red) Standby mode Indicator on(Green) Power on mode 2. Infrared Remote Receiver The effective receiving range for the signal is 5-8 metres from the front of the remote control window, and 30 degrees to the left or right side and 20 degrees above or below the remote control Window. 3. Universal iPod Dock - Audio/Video Playback - Charging iPod 4. 2.
Getting Started DVD 2 1 HDMI PC-IN VGA 3 4 5 Y Pb Pr 6 S-VIDEO VIDEO R L Audio in 7 8 9 RF 10 1. Switch: Switch on/off the power supply. Power on - To turn on the LCD TV - Be sure to turn off the power and unplug both units from the wall outlet before making any connections. Power off 2. AC Power IN: Connect to an earth 100-240V, 50/60Hz AC outlet with the Power Cable. 3. HDMI: Connect it to the HDMI of DVD or other equipment. 4. PC-IN: Connect it to the audio output terminal of PC.
POWER Switch on LCD TV when at standby mode or vice versa. INPUT Press to cycle through the input source. INPUT 1 2 3 4 5 6 7 8 9 0 -/-- PICTURE SOUND NUMBER BUTTONS Press 0-9 to select a TV channel directly when you are watching TV. Then press “OK” key to confirm. Press this button to enter a program number for multiple program channel such as 2-1,etc. Return to the previous channel viewed.
INPUT 1 2 3 4 5 6 7 8 9 0 -/-- PICTURE SOUND SLEEP CC Press to display the closed caption. MTS Press to select the audio channels. DISPLAY NOW PLAYING CH+ VOL+ EPG Press to enter the EPG menu directly. FAV Press to add or remove favorite channel. MUTE Buttons for DVD operating CH- VOL- MENU EXIT PG UP PG DN OK MENU AUDIO ONLY SETUP CC MTS EPG FAV LANGUAGE ZOOM SUBTITLE SLOW MENU ANGLE TITLE GOTO SHUFFLE REPEAT PROGRAM INTRO REPEAT A-B : Load/eject DVD disc.
TURN ON LCD TV 1. Connecting to the AC intput cable, at this time the TV will enter standby mode and indicator show red. 2. Use the POWER button can turn ON LCD TV from standby mode. TURN OFF LCD TV Press the POWER button on TV or on the remote control to enter standby mode. The indicator is red.
- Press the MENU button to display the mains menu. - Use / / / / OK buttons to operate the available menus. 1. Using the CH+/CH- button on the TV set or on the remote control. - Press CH+ button to increase channel number. - Press CH- button to decrease channel number. 2. Using 0-9 number buttons and -/-- button. You can select the channel number by pressing 0 to 9 or -/-- button, and press OK button to confirm. 3. Example - Select channel 5: press “5” button, then press OK button.
You can select the input source by pressing the INPUT button on the remote control or on the TV set. Picture menu options Press the MENU button, and use / button to select the Picture menu as below. 1. Use / button to select what you want to adjust in the Picture menu. 2. Press OK button, and adjust by / / / / OK buttons. 3. When you adjusted to your preference, press MENU button to exit.
Advanced Video Press OK/ button to enter the submenu as below: Aspect Ratio: Select the ratio of picture display. Color Temperature: Press OK/ / button to select the color temperature from Cool/Normal/Warm. Noise Reduction: Press OK/ / button to select the level of noise reduction from Off/Low/Medium/High. 3D Y/C: Press OK/ / button to set the 3D/YC on/off. Gradient Enable: Press OK/ / button to set the Gradient Enable on/off. Blue Screen: Press OK/ / button to set the Blue Screen on/off.
Advanced Audio Press / button to select and press OK/ Audio Only: Press OK / power 3 sec. to restore. / button to enter the submenu. button to set the video on/off. Select “YES”, the video will hide, hold down Channels menu options Press the MENU button, and use / button to select the Channels menu as below. 1. Use / button to select what you want to adjust in the Channels menu. 2. Press OK button, and adjust by / / / / OK buttons. 3. When you adjusted to your preference, press MENU button to exit.
Manual Add Channel When the channels are found, use OK button to add it to the channel list. Manual Channel Set Press OK button to display a channel list that you can select channel as below: Favorite Channels Press OK button to display the channel list that you can select channel as below: Channel Labels Allows you to name the channel that is selected. Use / button to move the cursor and use / button to input the name and then press OK button to confirm.
US Ratings Menu: Press / button to select and press OK / button to enter the US Ratings Menu. Canadian Ratings Menu: Press / button to select and press OK / button to enter the Canadian Ratings Menu. Advanced Rating: Press / button to select and press OK / button to set advanced rating on/off. Advanced Rating Lock: Press / button to select and press OK / button to enter the Advanced Rating Lock Menu. Note: You could not operate the menu if you turn the Advanced Rating function off.
Closed Caption Press / button to select and press OK / button to enter the Closed Caption. CC Mode: Press OK / button to enter and select CC mode. Analog CC: Press OK / button to enter and select analog CC mode. Digital CC: Press OK / button to enter and select digital CC mode. Advanced CC Settings: Press OK / button to enter Advanced CC Settings menu. Style: Press button to select CC style between Automatic and custom. You need to set it to Custom first if you want to change the value of items below.
Settings menu options in VGA/PC Select input source “VGA/PC”. Press the MENU button, and use / button to select the Settings menu as below. PC Setting Press / button to select PC Setting, then press OK / button to enter the PC Setting menu. Horizontal Position: Press / button to select and press OK / to enter, then press / to adjust the horizontal position of the picture. Vertical Position: Press / button to select and press OK / to enter, then press / to adjust the vertical position of the picture.
Settings menu options in Component(YPbPr) Select input source “Component”. Press the MENU button, and use / button to select the Settings menu as below. Component Set Press / button to select Component Set, then press OK / menu. button to enter the Component Set Horizontal Position: Press / button to select and press OK / to enter, then press adjust the horizontal position of the picture.
(page 13-14) : 0,0,0,0. “ok” If used, this optional feature can “block” undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings that restrict or “block” the programming that can appear on the TV. Parental control allows the user the capability of defining which program rating they consider accept-able, to the younger or more sensitive viewer.
iPod Operation iPod Operation The following iPod models are supported by this TV for music playback. Certain models from the below list can support video playback and photo viewing in addition to music playback. Please refer to the following sections on playing videos and viewing photos for details. 1) Docking your iPod the iPod before docking. When connecting an iPod to this iPod Dock, please ensure that the correct adapter plate is used. FAILURE TO DO SO MAY RESULT IN DAMAGE TO THE iPod.
iPod Operation 2) iPod-specific keys on the remote control INPUT 1 2 3 4 5 6 7 8 9 0 : Press to toggle between Manual Mode and iPod Mode -/-- PICTURE SOUND SLEEP DISPLAY NOW PLAYING - iPod Mode: TV displays iPod menu. iPod is controlled via menu. - Manual Mode: TV does not display iPod menu. Most iPod functions are controlled using control keys on iPod. NOW PLAYING: Press to return to the song or video you are playing. CH+ VOL+ MUTE EXIT: Exit the iPod menu.
iPod Operation 3) Getting Started – Playing Music and Videos Main iPod menu OK Browse and play songs Browse and play videos Select next song/video according to Shuffle settings Access advanced settings Access currently playing song or video NOTES: Playing Music Music Playlists Artists OK OK Now Playing Screen 21 Music Menu
iPod Operation Now Playing Screen – Music Playback The Now Playing Screen allows you to see artist, album and track information at-a-glance. This is the screen you will see most often when listening to music Album Art Agua Dulce, Agua Sal Track Title La Carretera Album Title Artist One Artist Name a bc 1:15/4:24 1/85 d e f Playback Information Bar a. Playback state: Play , Pause , Fast forward , Fast reverse , Shuffle Songs , Shuffle Albums b. Shuffle Setting: Shuffle off c.
iPod Operation Now Playing Screen – Video Playback The Now Playing Screen gives you at-a-glance information about the video you are viewing. The playback information bar shown at the bottom of the screen is the same as for music playback and is described in detail above. Video playback area Playback Information Bar HINT: Press EXIT to hide the playback information bar. Shuffle Songs Shuffle songs or videos according to the Shuffle settings. Shuffle Songs from the main iPod Menu and press OK .
iPod Operation 4) Viewing Photoes This TV can be used as a large screen for conveniently viewing photoes stored on your iPod. Photo viewing is supported by certain iPod models including iPod touch 1st and 2nd generation, iPod nano 3rd and 4th generation, iPod classic and iPod 5th generation. Other models do not support photo viewing. Photo viewing is supported in Manual Mode only.
DVD Operation DVD Basic Operation Turn on your TV then use the INPUT button on the remote control or on the TV to select DVD mode. If there is no disc in the DVD players the screen will show “NO DISC”. Place a disc Insert a disc according to the silk. Do not touch the playing surface. automatically draw the disc into the player. To "Eject" the disc, press the " " (EJECT)button on the remote control or on the TV.
DVD Operation Subtitles 1. Compatible with DVD, SVCD discs. 2. Press the Subtitle button on the remote once, and the subtitle info banner appears 3. When a DVD or SVCD is recorded with subtitles, you can use the Subtitle feature to view the subtitles on-screen. By default, subtitles are off. The info banner will display Subtitle Off. 4. To display subtitles, press the Subtitle button again.
DVD Operation DVD System Setup change them again. General Steps of Setup Menu 1. Pause or Stop the player. Press SETUP on the remote control. The main menu will be shown as below. 2. Press the Ÿ ź button to select the Icon of the desired section, e.g. “TV System" and press button to open that section. 3. Press Ÿ ź to select the desired feature and again press button to open that section. 4. Press Ÿ ź to select the desired feature and then press "OK" to select the new setting.
DVD Operation "0000". Using the Ÿ ź button, move the highlight to "PASSWORD", press the button and enter "0000". You will see the padlock symbol open. You may now change the RATING or put in a new password number. If the Lock symbol is BLUE you must press the button to enter the Please remember or write down the new Password and keep safe. RATING The Rating feature is a rating limit feature, like movie ratings. This helps you to control what DVD the family watches.
Playing Flash Media Playing media files from the USB and SD card slots - The following files formats are supported by this TV: JPG, MP3, WMA, MP4 (DivX3.11-5.11, Xvid), MPEG1 (DAT, MPG, MPEG), MPEG2 (mpeg, mpg). - File formats including the following are not supported by this TV: BMP, PNG, AAC, DivX 6, DivX HD, Vob, ts. - The following cards are supported by this TV: SD, MMC, Memory Stick (MS). - Only full-size card formats are supported.
Playing Flash Media 3) Play the Music, Video or view the Photos 2 1 3 4 5 Ź 8VH ŻŹ WR VHOHFW (3) - Music, (4) - Photo RU (5) - Movie 7KH OLVW RI IROGHUV LV GLVSOD\HG LQ DUHD (1). Ź 6HOHFW DUHD (1) XVLQJ WKH ŻŹ NH\V DQG VHOHFW WKH IROGHU XVLQJ Ÿź 7KH OLVW RI ILOHV LV GLVSOD\HG LQ DUHD (2).
Simple Troubleshooting Simple Troubleshooting Performs SYMPTOM DEALING METHOD NO POWER Check the power connection. Pull the plug out, wait for 60 seconds, then reconnect the power and run the set NO PICTURE NO SOUND Check the antenna connection. Try other TV channel due to the TV station problem. Modify the brightness or contrast setting. Increase the volume. Check that if the set is on the mute state or not. Check the voice setting condition. Check the voice mode setting condition.
Technical Specification Technical Specification LCD Panel Input Connector Panel Size 22 inch(diagonal) Brightness 300 cd/m2 Contrast 800:1 Resolution 1366X768 Video 1 S-Video 1 Audio(L/R) 1 VGA 1 PC Audio 1 HDMI 1 YPbPr 1 RF 1 Power Source AC100-240V 50/60Hz Power Consumption 60W improving the performance.
VIORETM LIMITED WARRANTY FLAT PANEL TELEVISION This VIORE brand Product, as supplied and distributed by VIORE and delivered new in the original carton to the original purchaser is warranted by VIORE against manufacturing defects in materials and workmanship for a limited warranty period of one (1) year on parts and labor. However, there will be only a 90 day parts and labor limited warranty for commercial use.
© 2009 VIORE, Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. “iPod” is a trademark of Apple, Inc., registered in the U.S. and in other countries. “Made for iPod " means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
