Owner`s manual

Viola Laboratories Spirito Reference Series Preamplifier Owner's manual
20
• Tape On/Off box enables or disables signal at the tape outputs. The
signal at the tape output is a fixed output, the volume and balance
control have no effect on this signal.
• Board Not Muted will mute only the local V30 module. This is
used if you have multiple V30 modules and want to mute only one
of them in the system.
• Board Name box is used to rename the V30 module. Highlight the
box, a cursor will appear. Use the volume control the cycle through
the ASCII character set and the balance to move the cursor one
position to the left or right. When you are through un-highlight the
box and the new name will appear at the top of the screen and in
the V20 output box.
• Bus Pair box works the same as the V20 bus pair box. The only
difference is that only one V30 can be on the same bus at one time.
The software will not allow more than one bus pair box to be
enabled.
• Return will bring you to the previous menu.
• The Channel group contains the individual channel names. The
names can be renamed using the same method as the board name.
• The Volume group is used to put in a volume offset. Highlight the
box, use the volume control to put in the offset then unselect the
box. The volume offset will now track with the main volume
control.
• Balance group enables or disables the balance control for the local
V30. This feature is useful in multi-room applications.
• Mute is used to mute an individual channel.