Owner`s manual

Viola Laboratories Spirito Reference Series Preamplifier Owner's manual
18
Return
Volume Balance
-20.0 dB 0.0 dB
2 Ch Input STATUS
Please press the Buttons for Actions
Bus
Pair
Board
Name
XLR/Fischer T
XLR/Fischer M
RCA B
Yes
No
No
2 Ch Output
Input Active Output
Figure 11: Reference Input Menu Screen
1.14 V20 Reference Input Card
• The input group allows you to select any one of the three inputs. As shown in
figure 11, the top balanced input is active. This is the default channel selection on
power up. Selecting a box under the active column will activate the channel to the
left.
• The output box displays, which output module, has been assigned to this input
module. Up to four V30 reference output modules can be assigned to one V20
input module. This can be used for multi room applications.
• Tap inside the board name to highlight the box. While the box is highlighted
turning the volume will scroll through the ASCII character set. The balance
control will move the curser to the next character position. When you are done
un-highlight the box and the new name will appear in the board name field at the
top right of the display.
• Selecting the bus pair icon will bring you to the bus pair screen shown in Figure
4. This is where the module bus routing is configured. The V20 input module can
be assigned to all four-bus pairs. This feature is useful for multi-room and
surround applications with multiple V30 output modules. Highlight the bus pair
box you want and then with the box highlighted hit the return box.