Owner`s manual

Viola Laboratories Spirito Reference Series Preamplifier Owner's manual
16
1.11 Board Icons
• Board icons occupy the lower half of the main screen. When the Spirito is turned
on the processor will poll each of the ten card slots. When a module is found an
icon for the board type is displayed on the main screen, refer to figure 8. Selecting
a board icon will display a menu for that module. Selecting the input module icon
brings you to the following screen.
1.12 Setup Menu
• Pressing the Setup button on the main screen will take you to the
setup menu screen.
• Pressing the Brightness button will highlight the surrounding box.
Use the volume control to adjust the screen brightness. When
finished press the brightness again to deselect.
• The Calibrate Touch Screen button will bring you to a calibration
screen. Follow the instruction on the calibrate screen. When you
finish you will be returned to the setup menu. The screen
calibration is set at the factory and should not need
adjustment. If you feel the calibration is off you can use the
button to perform a fresh calibration.
• Press Return to go back to the main screen.
Brightness Return
Calibrate
Touch
Screen
Volume Balance
-20.0 dB 0.0 dB
Main Setup
Please press the Buttons for Actions
Figure 9: Spirito Status Display screen