User`s manual

User’s Manual

Arctic GPRS Gateway 9 Viola Systems Ltd.

2. Physical Interfaces

Depending on the model, the Arctic

unit contains two or three panels for

interface connections and status

indication. These panels are:

1. Front panel. An example of a

typical configuration is shown in

the top figure. This panel

includes all connectors and

switches for the device

operation, optional input/output

connectors and the connectors

for network and serial interface.

2. Back panel. The GPRS antenna

connector and SIM card holder

are shown in bottom figure.

3. Side panel. The side panel

contains all LEDs which indicate

the status of the device.

Front Panel Description

The front panel of the Arctic consists of the following connectors and switches:

DC IN

OFF ON

RS1 RS2

pin1 pin15

I/O

1. Power supply connector

2. Power switch

3. Console serial port (RS1)

4. Console switch

5. DIP switches

6. Application serial port (RS2)

7. Ethernet connector

8. I/O connector (optional)

Note: Some of the connectors are present only with specific manufacturing options.