User manual

Chapter 5

Serial Port Conﬁguration

5.1 Conﬁguring serial gateway

This section describes how to conﬁgure serial <-> Ethernet functionality.

Serial gateway feature enables data from the serial port attached device to be routed to Ethernet and vice versa.

Serial gateway processes the transmitted data transparently and does not alter it any way except for buﬀering it

for transmission. Because of the transparent communication, any protocols can be used in actual communication

between nodes.

Figure 5.1: Serial gateway conﬁguration screen

Serial gateway conﬁguration depends on used protocols.

Both serial ports have their own conﬁguration screens, located in Applications->Serial Gateway (RS1)

and Applications->Serial Gateway (RS2).