User manual

CHAPTER 4. NETWORK CONFIGURATION 19
Figure 4.4: WAN Failover configuration
To enable any default routes, set ”WAN Default Route”=”Yes”. Any route settings are not effective if this
parameter is not enabled.
Set ”On Demand”=”Yes” if you want the backup WAN interface to come up only when primary interface
goes down. Disable if both wireless and wired WAN interfaces have to be up all the time.
4.1.5 Ethernet LAN
This screen configures the Ethernet LAN interface on Arctic 3G.
Figure 4.5: Ethernet LAN configuration
Ethernet LAN configuration is very simple. It configures the IP address for the Ethernet LAN interface.
4.1.6 Network monitor
This screen configures the interface connectivity monitor on Arctic 3G.
Figure 4.6: Network monitor configuration
When using 3G/VPN the use of monitor is heavily recommended to detect connection drops.