User manual

CHAPTER 3. QUICK INSTALLATION 16
3.6 Configuring default gateway
1. Select Network->WAN Failover from the left menu.
2. Set WAN Default Route”=”Yes”. This has to be enabled to use either WAN as default route interface.
3. If you want to use 3G as default gateway, set Primary WAN Interface”=”Mobile WAN (3G)”.
4. If you want to use Ethernet WAN as default gateway, set Primary WAN Interface”=”Ethernet WAN”.
5. If you have both Ethernet WAN and Mobile WAN configured, you can define the Backup WAN Interface.
If the primary WAN interface comes down, Arctic 3G automatically switches default route to backup WAN
interface. Figure 3.3 shows example configuration where Ethernet WAN is configured as default route.
Figure 3.3: Ethernet WAN default route example
6. Press Submit button on the bottom to save the settings.
7. Select Tools->Reboot from the left menu and press Reboot button to restart the unit.