User`s manual

User's Manual
Arctic IEC-104 Gateway
Firmware Version 5.0.9 47 Document Version 1.5
IEC-104 gateway enabled
Note
7.2 Serial settings
The serial settings define the properties of physical serial communication
between the Arctic and an IEC-101 slave. The selection between
RS-232/422/485 is done with physical DIP switches located below the RS2
serial port.
Figure 35. Serial Settings
Speed (bps)
Table 7: IEC-101 serial communication speed (bps)
IEC-101 serial communication speed (bps)
Type Serial speed
Units Bits per second
Value range 1200, 2400, 4800, 9600, 19200, 38400, 57600
Note
Data bits
Table 8: Number of data bits used on IEC-101 serial communication
Number of data bits used on IEC-101 serial communication
Type Serial data bits
Units Bits
Value range 5, 6, 7, 8
Note
Parity
Table 9: Parity method used on IEC-101 serial communication
Parity method used on IEC-101 serial communication
Type Serial data parity