User`s manual

User's Manual
Arctic IEC-104 Gateway
Firmware Version 5.0.9 36 Document Version 1.5
Get commands
Access – Are get commands allowed for everybody, only for defined phone or
are these disabled.
Allowed phone – Defined phone number for get commands.
Require password – Require system password for get commands.
Set commands
Access – Are set commands allowed for everybody, only for defined phone or
are these disabled.
Allowed phone – Defined phone number for set commands.
Require password – Require system password for set commands.
Allow execute commands – Allow execute commands to be run on Arctic.
Other
Reply error to unknown commands – If set to "No", incorrect commands are
silently disregarded. If set to "Yes", Arctic will send error SMS.
Reply error to unauthorized commands – If set to "No", unauthorized
command are also silently disregarded. If set to "Yes", Arctic will send error
SMS.
Factory reset command (8 chars min) – Command to issue device back
to factory settings. This does not require system password. After issuing this
SMS command, Arctic will have factory settings (eg. password is set back to
factory default also).
5.3 Firewall Menu
Through the Firewall menu, you can configure built-in firewall of the Arctic.
Firewall can be disabled or enabled and separate rules may be created for
GPRS to Arctic, GRPS to LAN and LAN to GPRS.