User`s manual

User's Manual
Arctic IEC-104 Gateway
Firmware Version 5.0.9 11 Document Version 1.5
2 Physical Interfaces
The Arctic unit contains three panels for interface connections and status
indication. These panels are:
1. Front panel:
The front panel configuration is shown in figure 2. This panel includes all
connectors and switches for the device operation, optional input/output
connectors and the connectors for network and serial interface.
2. Back panel:
The GPRS antenna connector and SIM card holder are shown in figure 6.
3. Side panel:
The side panel as shown in figure 7 contains all LEDs which indicate the
status of the device.
2.1 Front Panel Description
The front panel of the Arctic GPRS consists of the following connectors and
switches:
Figure 2. Front Panel Description
1. Power supply connector
2. Console serial port (RS1)
3. Power switch
4. Console switch
5. DIP switches
6. Application serial port (RS2)
7. Ethernet connector
The Arctic has rails to enable wall or rack mounting. The front panel contains
slots for nuts or other mounting accessories (optional) in order to gain access
to these rails.