User`s manual

User’s Manual
Arctic GPRS Router 9 Viola Systems Ltd.
2. Physical Interfaces
Depending on the model, the Arctic
unit contains two or three panels for
interface connections and status
indication. These panels are:
1. Front panel. An example of a
typical configuration is shown in
the top figure. This panel
includes all connectors and
switches for the device
operation, optional input/output
connectors and the connectors
for network and serial interface.
2. Back panel. The GPRS antenna
connector and SIM card holder
are shown in bottom figure.
3. Side panel. The side panel
contains all LEDs which indicate
the status of the device.
Front Panel Description
The front panel of the Arctic GPRS Router consists of the following connectors and switches:
1. Power supply connector
2. Power switch
3. Console serial port (RS1)
4. Ethernet