Specifications

38 / 80

• Figure 45: M2M GW's SSH-VPN configuration

3. Click “Add Peer” button.

For the example configuration in Figure 6: Scenario 1, M2M GW connected with

public IP address, configure the settings as follows:

Peer name: arctic1

Peer SSH key:

IP pair (M2M IP : Peer IP): 172.16.0.1:172.16.0.2

Routing Mode: Tunnel the following network

Remote Network IP: 10.10.10.0

Remote Network Mask: 255.255.255.0

Peer Enabled: Yes

4. Click “Confirm” button to apply the changes.

5. Check that the “arctic1” is selected in “Add key for peer” drop down menu.

6. Copy the SSH public key from Arctic (from Arctic’s SSH-VPN page). Note that the

key is longer than the visible part in the screen.

7. Paste the key to the “- Key” line in M2M GW’s SSH-VPN configuration screen.

8. Click “Enter key” button.

9. Respectively copy the “server public key” and paste it to the Arctic’s SSH-VPN

settings to the line “Insert SSH key for primary server <IP address>”