Specifications

9 / 15

5. Power on the Arctic. Log in as root user and type reboot at the command line, then

right away press continuously any key

, e.g. “Enter” in order to interrupt the boot sequence

of Arctic.

See the sequence below:

# reboot

(Start pressing “Enter key”)

Restarting system.

PPCBoot 1.1.6 (Apr 14 2005 - 18:44:18)

Viola Systems Arctic Board

CPU: MOTOROLA Coldfire MCF5272

Board: Viola Systems Oy Arctic Board

http://www.violasystems.com/

DRAM: 32 MB

FLASH: 8 MB

In: serial

Out: serial

Err: serial

Net: 00:06:70:01:02:03

Hit any key to stop autoboot: 0

arctic>

You can stop pressing the key after you will see the arctic> prompt.

6. Verify the network settings of the Arctic.

At the arctic> prompt type command printenv. Plenty of information will appear.

Pay attention to the following lines:

netmask=255.0.0.0

serverip=10.0.0.1