Specifications
4 / 15
1. General
1.1. Purpose
This document describes how to upgrade the firmware of certain Arctic products. See the next
chapter for applicable products.
Note:
• Don’t begin upgrading a firmware without first verifying the procedure and file
versions from Viola Systems Ltd. Technical Support (abbreviated later in this
document as Technical Support).
1.2. Summary
The Arctics that share the same architectural platform can be upgraded with very similar
instructions. This document contains instructions that are common for the following Arctics:
Arcticproduct
Product
code
Exampleusecase
GPRSRouter 2270
ConnectingremoteEthernetdevicestocentralsitevia
GPRScellularnetwork
EDGERouter 2281
ConnectingremoteEthernetdevicestocentralsitevia
GPRS/EDGEcellularnetwork
GPRSGateway 2260
Connectingremoteserialand/orEthernetdevicesto
centralsiteviaGPRScellularnetwork
EDGEGateway 2265
Connectingremoteserialand/orEthernetdevicesto
centralsiteviaGPRS/EDGEcellularnetwork
IEC‐104Gateway
(GPRS)
2205
ConnectingremoteIEC‐101/104RTUsand/orEthernet
devicestocentralsiteviaGPRScellularnetwork
IEC‐104Gateway
(EDGE)
2208
ConnectingremoteIEC‐101/104RTUsand/orEthernet
devicestocentralsiteviaGPRS/EDGEcellularnetwork
ModbusGateway
(GPRS)
2202
ConnectingremoteModbusRTUsand/orEthernet
devicestocentralsiteviaGPRScellularnetwork
ModbusGateway
(EDGE)
2203
ConnectingremoteModbusRTUsand/orEthernet
devicestocentralsiteviaGPRS/EDGEcellularnetwork
Note:
• Do not apply these instructions to other Arctic models than listed above
• There is a separate application note for upgrading the Viola Arctic 3G Gateway
The upgrade is consisting of two parts:
• Kernel image upgrade
• File system image upgrade.
It is not always needed to upgrade the kernel image of Arctic. Consult Technical Support regarding
the procedure and what files are needed.