Specifications

13 / 15
7. Set the values as follows: IP address as 10.0.0.1, netmask as 255.0.0.0 and
default gateway as 10.10.10.10. This way your computer is belonging to the same
network as the Arctic.
8. Verify that you are offering the kernel and root filesystem images with TFTP server. Start
the TFTP server and click the Browse button, then select the directory you want to share
with TFTP. You may have to grant the privileges for TFTP server to work as server,
depending on your virus detection software suite.
Check as well that the Server interface (IP address of the network card) is 10.0.0.1 if
you have multiple network interfaces in your computer.
9. Double-check with Show Dir button that you have the proper files in place
(Arctic’s kernel image and/or filesystem image).
3.7. Performing the upgrade
If you’re upgrading from older major version of firmware, e.g. from 4.0.1 to 5.0.8 series, the kernel
must be upgraded as well as the filesystem image. Follow the Technical Support’s instructions
whether the kernel upgrade is needed in minor version upgrade (e.g. from 5.0.7 to 5.0.8) or not.