User Manual

.
①
②
③
④
（
System Settings System Settings
21 22
hardwired with the VIOFO HK4, if you use external battery, this
function won’t work.）
"OFF" means the camera will enter parking mode right away when
the engine is off.
"90s" means the camera will enter parking mode 90 seconds after
engine is off.
• Parking Recording Duration:
"Off" means the camera will keep recording during parking mode.
"1 hour" means the camera will shut down after it gets into parking
mode for 1 hour.
• Time-lapse Recording: Record video from frames captured at
specific time intervals to conserve memory and reduce the time it
takes to review video. The default is off.
• Live Video Source: Front camera / Rear camera / Rear Overlaid /
Front Overlaid.
• Rear Image Rotate: Turn on / off the rear camera image rotate.
• Rear Image Mirror: Turn on /off the rear camera image mirror.
• GPS: Turn on / off GPS logger. A GPS module is used to include the
location data in the recorded videos. If disabled, your camera will no
longer measure your speed and position; nor synchronize the time /
date. (Only available when connecting with GPS signal) Please use
“Dashcam Viewer” to playback videos and to visualize your position
and speed on your computer.
• Speed Units: Kilometer per hour (KMH) and miles per hour (MPH)
are available for speed units.
• GPS Stamp: Imprint the GPS information on the recorded video.
• Date Stamp: Imprint the time and date on the recorded video.
• Brand Model Stamp: Imprint the camera model on the recorded
video.
• License Plate Number: Imprint the car number on the recorded video.
• Custom Text Stamp: Imprint the customize text on the recorded
video.
• Beep Sound: Off / Only Keytone / Only Boot Sound / All.
You can enable/disable the button and startup sounds.
• Boot delay: The camera will boot seconds delay when powered on.
The settings are Off / 5s / 10s.
• Language: 简体中文 / 繁體中文 / English / Français / Español /
Português / Deutsch / Italiano / Русский / 日本語 / Türkiye / Română /
Polski / Česky / Slovensky
• Voice Notification: Turn on / off the voice notification.
• Date / Time: Set system date / time.
• Time Zone: Set the current time zone for GPS time and date calibration.
Note: the time zone must be manually adjusted for daylight savings.
• Frequency: Set it to minimize flickering and banding in the recorded
video.
• Screen Saver: The screen goes black by default after 1minute while
recording. You can set it by adjusting different time intervals on menu.
• Format: The operation will delete all data on the microSD card.
Note: Once you format the card, all information will be deleted and
unrecoverable. Make sure to back up all files that you needed before
formatting.
• Format Reminder: Set the number of days between format warnings.
• Default Setting: Restore device to factory settings.
• Version: Check the current firmware version of the camera.