Technical data

7
Introduction
The Vision 250E combines a manually-operated EFP-type pan and tilt head with electronic en-
coders to provide precise real-time digital electronic positioning.
Pan bar mounting points are located at the rear of the head, on either side of the camera mounting
platform. A telescopic pan bar (2) is supplied and is attached using a pan bar clamp, with angular
adjustment available on the mount serrations. A second pan bar may be fitted.
The head has a flat base (17), with `Quickfix'® and standard four-hole fixing. Mounting bolts,
washers and a spanner are also provided.
The camera is attached to the head by means of a slide plate (13). A clamp (1) is provided to hold
the slide plate in position and a lock (11) prevents its inadvertent removal from the head.
Balance graph
200
180
160
140
120
8
7
6
5
100
4
80
60
3
2
50
246 1012141618202224 383626
8075705045403530252015105
in. mm
kg
lb
± 90°
± 68°
70
90
110
130
150
170
190
8 28 303234 4042
55 60 65 85 90