User Manual

Back

Mounting the camera using the 1/4 in. screw and pin

adaptor

A 1/4 in. screw and pin adaptor, comprising a 1/4 in. locating pin on a plate and a 1/4 in. camera

mounting screw, is stored in the camera storage compartment (18) on right-hand side of the cam-

era mounting platform. The process of mounting the camera onto the head is the same as de-

scribed in Mounting the camera using 3/8 in. camera mounting screws on page 12.

To mount the camera onto the head:

Remove the camera slide plate (16) from the head (Fig. 3). Turn the slide plate clamp (13)

approximately 1/2 a turn in a counter-clockwise direction to release the clamp. Then push

the slide lock release (14) in a forwards direction to release and eject the slide plate (16).

When released, the camera slide plate (16) can be lifted upwards and removed from the

head.

Open the camera storage compartment (18) by lifting the cover upwards and remove the 1/

4 in. screw and pin adaptor (19) (Fig. 6).

Fig. 5 Mounting the camera onto the head

1313