User Manual

Back
12
Mounting the camera using 3/8 in. camera mounting
screws
The camera slide plate (16) is secured to the base of the camera using either two 3/8 in. camera
screws or a 1/4 in. screw pin adaptor (see Mounting the camera using the 1/4 in. screw and pin
adaptor on page 14).
To mount the camera onto the head:
Remove the camera slide plate (16) from the head (Fig. 3). Turn the slide plate clamp (13)
approximately 1/2 a turn in a counter-clockwise direction to release the clamp. Then push
the slide lock release (14) in a forwards direction to release and eject the slide plate (16).
When released, the camera slide plate (16) can be lifted upwards and removed from the
head.
Fig. 3 Removing the camera slide plate
(13)
(14)
(16)