User Manual

Back
10
in. camera mounting screws can be stored in the camera screw storage compartment (18) located
on the left-hand side of the camera mounting platform.
Pan bar
Pan bar mounting points (6) are located at the rear of the head on either side of the camera mount-
ing platform. The pan bar (5) is attached using a pan bar clamp (4), with angular adjustment avail-
able on the mount serrations. A fixed pan bar is supplied with the Vision 3AS, 5AS and 8AS heads.
A telescopic pan bar is supplied with the Vision 10AS head. A second pan bar may be fitted on
the other side of the head if required.
Field service spares kit
A field service spares kit (V4045-1902), that includes brake levers and a spare battery, is supplied
with all Vision AS pan and tilt heads. See the Field service spares kit on page 27 for more infor-
mation.