User guide

Publication Part No. V3851-4981 Issue 2 17

Lens serial connection

The lens serial port (9) is not currently utilized.

Vinten Radamec PDA connection

The Vinten Radamec PDA configures, calibrates and coordinates all devices connected to the HPM.

Connect the Vinten Radamec PDA to the PDA Comms port (16) using the supplied PDA cable. For

more information please refer to the Vinten Radamec PDA Operators Guide (Publication Part No.

V4015-4980).

VR connection

The VR data port (15) provides output for the studio VR system. The RS422 pin designations are as

follows:

The data is outputted in the Vinten Radamec D1 data packet.

Cable Clamp

All cables can be fed through and secured using the cable clamp (14) to keep the system tidy and

prevent connectors/ports from being damaged if a cable becomes snagged.

Switching on

Once all connections have been made, the HPM can be switched on using the power switch (17).

HPM

Function

VR Computer

Function

2 RXD- / RXA VR specified TXD- / TXA

6 RXD+ / RXB VR specified TXD+ / TXB

3 TXD- / TXA VR specified RXD- / RXA

7 TXD+ / TXB VR specified RXD+ / RXB

CAUTION! Ensure that connected cables do not become entangled around the

pan axis, due to the possible continuous 360° rotation of the head.