Owner manual

Maintenance

Changing the Data Baud Rate (Ci-1 Only)

Depending on the requirements of the installation, the data baud rates

of the modem input and output channels on the Ci-1 can be

independently changed with the mode selection switches. The

following data baud rates are available for selection:

Set the numbered

switches on the Ci-1

to change the baud

rates.

Routine Maintenance

The Ci box requires minimal routine maintenance, apart from checking

the connections and overall operation periodically.

Routine checks

During use, check the following:

• Check cables for signs of wear or damage. Replace as necessary.

• Check that all cables are connected properly.

Cleaning

During normal use the only cleaning required should be a regular wipe

over with a dry, lint-free cloth. Dirt accumulated during storage or

periods of disuse may be removed with a vacuum cleaner. Particular

attention should be paid to all connection ports.

Output

Settings

Input

Settings

Baud Use 1 2 3 4

4800

For the most responsive control of

heads, although this rate can be

unreliable over longer cable runs.

2400 For longer cable runs

1200 For phone line or RF transmissions